Everbuild Black Jack Bitumen Roofing Emulsion 5 Liter 1 Each 9065LTR Everbuild reflective paint Cromwell Tools Solar Reflective Roof Paint Sealants and Tools Direct PERFECTONISH 907 Black Jack Solar Reflective Paint Thin Bituminous. Bituminous Based Aluminium Protective Coating for Heat Reflection EVERBUILD BLACK JACK 907 Solar Reflective Paint is a thin, bituminous based aluminium protective paint with a brushable consistency that dries to a silvery finish. Specifically designed for application over primed metal walls and roofs, it effectively reduces heat absorption and prolongs the life of roof repairs and bituminous coatings by reflecting solar radiation. Key Features & Benefits Reflective Finish: Dries to a bright silver finish that reflects sunlight, reducing heat absorption. Fast Drying: Touch dry in approximately 1 hour under normal conditions. UV Protection: Prolongs the lifespan of bituminous coatings by protecting against UV degradation. Versatile Application: Suitable for use over primed metal surfaces and bituminous coatings. Water Resistant: Resistant to water and most salt solutions. Ideal For Primed metal roofs and walls. Bituminous roof coatings to extend their service life. Product Details Colour: Silver Packaging: 5L tin Coverage: 46 m per litre on porous surfaces; up to 11 m per litre on non porous surfaces Drying Time: Approximately 1 hour, depending on conditions Density: Approximately 1 g cm at 20C Shelf Life: 24 months in unopened containers stored between 5C and 25C Application Instructions Surface Preparation: Ensure surfaces are clean, dry, and free from dust, dirt, oil, grease, and loose material. Stirring: Stir the paint thoroughly before use and periodically during application. Application: Apply two coats by brush or mohair roller. The second coat should be applied as soon as the first coat is dry (12 hours). Over Bituminous Coatings: Allow the following minimum periods after the final coat has dried before applying this product: Hot applied products: 6 hours Solvent based coatings: 3 days Water based coatings: 2 weeks Limitations Do not use in areas where subsequent solvent contact is likely. Not suitable for direct application to expanded polystyrene. Avoid inhalation of vapours in confined spaces. Stir well before use and during application. Cleaning of Tools Clean tools and equipment with white spirit immediately after use. Cured material must be removed mechanically.